Printing Using the Computer
64
4
c
Select [
Infrastructure Mode
] using the or key, and then press the
OK
or
Enter
key.
d
Select [
Network Setting
] using the or key, and then press the
OK
or
Enter
key.
e
Select [
Setup Wizard
] using the or key, and then press the
OK
or
Enter
key.
f
If any messages appear, press the
OK
or
Enter
key for each message.
The SSIDs for the available networks appear.
g
Select the SSID using the or key, or select [
Other…
] and enter the SSID (from 1 to 32
characters), and then press the
OK
or
Enter
key.
The [
Password
] screen appears.
h
Enter the password (from 8 to 63 characters or, when using WEP, from 5 to 13 characters), and then
press the
OK
or
Enter
key.
i
The screen returns to the [
Settings
] menu screen, and
blinks while the connection is being
established.
After 90 seconds, the indicator will change to
, but your machine will continue trying to connect to
the network.
j
When connected, depending on the strength of the wireless signal, the wireless connection indicator
shows of the following symbols:
Note
If you start the setup wizard for the Infrastructure mode or select the network settings for the Direct mode
when the wireless function of the machine is turned off, [
Turning on Wi-Fi Radio
] appears and the
wireless function turns itself on automatically (or after the
OK
key is pressed). It is no longer necessary to
turn the Infrastructure mode or Direct mode on manually.
Summary of Contents for p-touch D800W
Page 250: ......
