191
24
24
This P-touch labelling machine can be powered by the AC adapter (included) or the rechargeable Li-ion
battery (optional: PA-BT-4000LI). Use the power source appropriate for your intended use.
With the rechargeable Li-ion battery installed, you can use the machine in locations that do not have AC
power.
The battery is recharged by the AC adapter when the battery and the battery base are attached to the
machine.
Installing the Rechargeable Li-ion Battery
24
a
Disconnect the AC adapter and then attach the battery base (optional: PA-BB-003) to the machine. For
more information about attaching the battery base, see its instruction manual.
b
Open the battery cover on the bottom of the machine.
c
Insert the battery into the battery compartment.
d
Close the battery cover.
Note
The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate
depending on the voltage.
Using the Rechargeable Li-ion
Battery/Battery Base (Optional:
PA-BT-4000LI/PA-BB-003)
24
Summary of Contents for p-touch D800W
Page 250: ......