Troubleshooting
203
25
Error Messages
25
When an error message appears on the display, follow the directions provided below.
Message
Solution
Tape Removed!
Do not remove the tape cassette while printing.
Text Too Large!
Select a smaller font size.
The size of transferred symbols has exceeded the label width when the
machine is printing the symbols using the vertical orientation. Create the
transferred symbol data using a size that fits in the label you are using.
Unable to use 01!
The print head setting is incorrect. Turn the machine off, and then on again.
Unable to use 02!
The motor operation is faulty. Turn the machine off, and then on again.
High Res/Speed Print Not
Available!
When using high resolution or high speed printing, you must connect the AC
adapter and use only TZe laminated tape with black ink, and print from the
computer. Otherwise, print using the standard setting.
You cannot use this function for TZe-FX**1 tape.
Holder Malfunction! (Label)
The operation of the label feeding mechanism is faulty. Turn the machine
off, and then on again. Check that the tape cassette is installed correctly. If
the error continues, contact Brother customer service.
Adapter Connected or
Disconnected!
This message appears if you connect or disconnect the AC adapter during
printing. To clear the error and print the print job again, press and hold a
button other than the
(Power) button. To cancel the print job, press and
hold the
(Power) button.
File Transfer Failed!
The model name set for the sent file is incorrect. Create the file using the
correct model name.
Summary of Contents for p-touch D800W
Page 250: ......