Brother P-Touch 18R, User Manual

Page: 8 / 70

INTRODUCTION
6
Safety Precautions
CAUTION
Rechargeable battery
Failure to observe the following may result in fluid leaking, overheating, rupture, or
deteriorated performance and life span.
• Do not hit or throw the battery.
• Do not use or leave battery exposed in direct sunlight, near heaters or other hot
appliances, or in any location exposed to extremely high temperatures.
• Remove the battery when not using the P-touch for any extended period of time.
• If battery fluid comes into contact with skin or clothes, wash the affected areas
thoroughly with clean water. Battery fluid is harmful to skin.
Battery charger
Failure to observe the following may result in fire, electric shock, or short circuit.
• Do not use or place the battery charger in direct sunlight, near heaters or other
hot appliances, in any location exposed to extremely high temperatures, high
humidity, or dusty locations.
• Do not disassemble or modify the battery charger.
• Do not hit or throw the battery charger.
• Do not carry or store the battery charger together with metallic articles.
AC adapter
• Be sure to disconnect the AC adapter and battery charger from the power outlet
and the P-touch when not using the P-touch for any extended period of time.
• Always hold the plug when disconnecting the power cord from the power outlet.
Tape cutter
• Do not touch the tape cutter with your hands. This may result in injury.
Usage/storage location
• Do not place the P-touch or battery charger in unsafe locations such as unstable
platforms or high shelves, etc. It may fall down and cause an injury.
• Do not place heavy objects on the P-touch or battery charger. It may fall down
and cause an injury.
Memory
• Any data stored in memory will be lost due to failure or repair of the P-touch, or
if the battery expires.
Tape
• Depending on the environmental conditions and the material and condition of
the affixing surface, the label may peel off or the colour of the tape may change.
When removing labels, adhesive may remain, the tape's colour may be
transferred to the surface, or the surface beneath the label may otherwise be
damaged. Be sure to test the label on the intended surface and material before
affixing the label.