Brother P-Touch 18R User Manual Download Page 7 | Manualshive

Page: 7 / 70

background image

1

2

3

4

5

6

7

8

9

5

z

I

N

T

R

ODUCT

IO

N

Safety Precautions

WARNING

• If the battery begins to emit an odour, overheat, discolour, deform, or any other

change occurs during use, charging, or storage, remove the battery immediately
and discontinue use.

Battery charger

Failure to observe the following may result in fire, overheating, or failure.

• Do not allow metallic articles to short-circuit the terminals of the charger.
• Do not let the charger get wet. If water or other liquids get in the charger, unplug

the AC adapter immediately.

• Do not use the charger while the charger terminals are wet or have condensation

on them.

• Do not use this charger with any product other than the P-touch.
• Use only the AC adapter provided with the P-touch.
• If the charger begins to emit an odour, overheat, discolour, deform, or any other

change occurs during use, charging, or storage, remove the P-touch from the
charger immediately, disconnect the AC adapter, and discontinue use.

AC adapter

Failure to observe the following may result in fire, electric shock, or failure.

• Always use the specified voltage (230V) and the AC adapter (AD-18ES)

provided.

• Do not overload the power outlet.
• Do not place heavy objects on, damage or modify the power cord or plug. Do not

forcibly bend or pull the power cord.

• Do not use a damaged power cord.
• Do not touch the AC adapter or power plug with wet hands.
• Make sure that the plug is fully inserted to the power outlet. Do not use an outlet

that is loose.

P-touch

Failure to observe the following may result in fire, electric shock, or failure.

• Do not disassemble or modify the P-touch.
• Do not drop, hit or otherwise damage the P-touch.
• Do not spill drinks or other liquids on the P-touch, or otherwise let the P-touch

become wet.

• Do not use the P-touch if any foreign object has entered the P-touch.

If any foreign object has entered the P-touch, immediately turn the power off,

disconnect the AC adapter, remove the battery, and discontinue use.

• If the P-touch begins to emit an odour, overheat, discolour, deform, or any other

change occurs during use, charging, or storage, remove the P-touch from the
charger immediately, disconnect the AC adapter, remove the battery, and
discontinue use.

• Do not let children play with the empty package that the P-touch came in when

purchased. Store the empty package in location out of the reach of children, or
dispose of it. Empty packaging can be a choking or suffocation hazard for
children.

«
...
5
6
7
8
9
...
»

Summary of Contents for P-Touch 18R







































































Reviews:

No comments

Related manuals for P-Touch 18R

Brand: Caffitaly System Pages: 12

Brand: Caffitaly System Pages: 36

Brand: Caffitaly System Pages: 24

Brand: Caffitaly System Pages: 60

Brand: Cafina Pages: 36

Brand: Sanremo Pages: 5

Brand: Waring Pages: 44

Brand: Sub-Zero Pages: 52

Brand: Ascaso Pages: 6

Brand: Jenn-Air Pages: 88

Brand: Pierro Pages: 60

Brand: Cornelius Pages: 2

Brand: Witt Pages: 132

Brand: Toastess Pages: 16

Brand: Dash Pages: 32

Brand: Bunn Pages: 26

Brand: White and Brown Pages: 20

BARISTA AROMA SOLO

Brand: STARBUCKS Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands