Brother P-Touch 18R User Manual Download

Page: 24 / 70

GETTING STARTED

Feeding Tape

The Feed & Cut function feeds 22.5 mm of blank tape then cuts the tape.

Press the

key.

“Feed & Cut?” appears on the display.

Press the

key to feed tape.

The message “Feeding Tape... Please Wait” appears while the tape is fed, and
then the tape is cut.

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0,
-1, -2) to make the screen easier to read. The default setting is “0”.

Press the

key to display the Tools menu, select

“LCD Contrast” using the

key, and then

press the

key.

Select a contrast level using the

key.

The screen contrast changes each time you press the

key, allowing you to set the most suitable

contrast.

Press the

key.

Feeding Tape

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape

cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon

to be discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the

tape to jam..

Press

while “Feed & Cut?” is displayed to cancel tape feeding.

LCD Contrast

• Press the

key to return to the previous step.

• Pressing the

key on the contrast setting screen sets the contrast to the default value

“0”.

Summary of Contents for P-Touch 18R







































































Search results

Summary of Contents for P-Touch 18R

Reviews:

Related manuals for P-Touch 18R

Brands by name

Popular brands

Brother P-Touch 18R, User Manual

Search results

Summary of Contents for P-Touch 18R

Reviews:

Related manuals for P-Touch 18R

Brands by name

Popular brands