Brother P-Touch 18R User Manual Download Page 60

Page: 60 / 70

TROUBLESHOOTING

What to do when...

The label is not
printed after pressing
the

key.

Has text been entered?

A label will not be printed if
there is no text entered.

Is the tape cassette installed
correctly, and is there
enough tape remaining?

Check the tape cassette is
installed correctly, and that
there is enough tape
remaining.

Is the end of the tape bent?

If bent, cut the bent section
of tape with scissors and
thread the tape through the
tape exit slot correctly.

Is the tape jammed?

If jammed, remove the tape
cassette, carefully pull out
the jammed tape, and then
cut the tape with scissors.
Check that the end of the
tape passes through the
tape guide, and reinstall the
tape cassette.

The label is not
printed correctly.

Is the tape cassette installed
correctly?

When installing a cassette,
press firmly until it clicks into
place.

Is the print head clean?

If not, clean the print head
using a cotton swab or
optional print head cleaning
cassette (TZ-CL4).

Is Cut Option set to Chain or
No Cut?

When these options are set,
the tape is not fed after
printing the label. Check the
Cut Option setting, or press
the

key to feed and cut

the tape.

Is the rechargeable battery
charged sufficiently?

If the message “Recharge
Battery!” is displayed,
charge the battery.

Problem

Cause

Solution

Summary of Contents for P-Touch 18R







































































Search results

Summary of Contents for P-Touch 18R

Reviews:

Related manuals for P-Touch 18R

Brands by name

Popular brands

Brother P-Touch 18R, User Manual

Search results

Summary of Contents for P-Touch 18R

Reviews:

Related manuals for P-Touch 18R

Brands by name

Popular brands