Brother P-Touch 18R User Manual Download Page 6 | Manualshive

Page: 6 / 70

background image

INTRODUCTION

4

Safety Precautions

Please read the following directions for safe use and handling before using your P-
touch. These safety precautions are provided for your benefit to prevent unnecessary
injury to you and those around you, and to prevent damage to the product. Please read
and follow them carefully.
The following symbols indicate the level of danger associated with not using the
product within the specified guidelines.

The following symbols indicate specific directions.

Safety Precautions

WARNING

This symbol denotes that improper handling poses a risk of
causing death or serious injury.

CAUTION

This symbol denotes that improper handling poses a risk of
causing injury or damage to the product.

: This symbol denotes that the action poses a risk of danger.
: This symbol denotes that the action is prohibited.
: This symbol denotes that the action is required.

WARNING

Rechargeable battery

Failure to observe the following may result in fluid leaking, overheating, rupture, or fire,
causing burns or other injuries.

• Do not throw the battery into a fire, or heat, solder or weld, disassemble or modify

the battery.

• Do not allow metallic articles to short-circuit the terminals of the battery.
• Do not carry or store the battery together with metallic articles.
• Do not remove or damage the plastic cover on the battery, or use a battery with

the plastic cover removed or damaged.

• Use only the battery charger designed exclusively for the rechargeable battery

provided. Do not use any other battery charger.

• Do not charge the battery in high temperature locations.
• Do not use the battery with the positive (+) and negative (-) terminals connected

incorrectly.

• If the battery leaks or emits an odour, it must be moved away from fire

immediately.

• Do not let the battery get wet.

• If the battery leaks, be careful not to let battery fluid contact your eyes.

Battery fluid contacting your eyes may result in the loss of eyesight. If battery
fluid comes into contact with your eyes, flush your eyes with clean water and
seek medical attention immediately.

«
...
4
5
6
7
8
...
»

Summary of Contents for P-Touch 18R







































































Reviews:

No comments

Related manuals for P-Touch 18R

Brand: LabelTac Pages: 32

Brand: Rancilio Pages: 2

the Dual Boiler BES920

Brand: Sage Pages: 34

Brand: Saeco Pages: 44

NIZZA 1604A Business

Brand: Kaffit Pages: 40

Brand: Saeco Pages: 56

CLASSE 11 Series

Brand: Rancilio Pages: 28

Primula SPEAK & BREW SAB-3001

Brand: Epoca Pages: 8

Brand: Jura Pages: 4

Koro Prime Espresso

Brand: N&W Global Vending Pages: 68

Kitchen Pro K6744

Brand: Regal Pages: 60

Brand: Hamilton Beach Pages: 12

Brand: Mr. Coffee Pages: 14

Brand: Hamilton Beach Pages: 26

i-Joy Cafe Ultimate

Brand: Beem Pages: 100

Brand: Klarstein Pages: 36

Brand: BRAVILOR BONAMAT Pages: 114

Brand: Butler Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands