manualshive.com logo in svg

Brother MFC-J1010DW, Online User'S Manual

Share
Download
Brother MFC-J1010DW Online User'S Manual Download Page 401

 Home > 

Troubleshooting

 > 

Printer Jam or Paper Jam

 > Paper is Jammed in the Front of the Machine (Jam

Front)

Paper is Jammed in the Front of the Machine (Jam Front)

If the LCD displays 

[Jam Front]

 or 

[Repeat Jam Front]

, follow these steps:

1. Unplug the machine from the AC power outlet.

IMPORTANT

(MFC-J1010DW/MFC-J1012DW)
Before you unplug the machine from the power source, you can transfer your faxes that are stored in the
machine's memory to your computer or another fax machine so you will not lose any important
messages.

2. Pull the paper tray (1) completely out of the machine as shown by the arrow.

1

3. Pull the two green levers inside the machine to release the jammed paper.

4. Slowly pull out the jammed paper (1).

1

395

Summary of Contents for MFC-J1010DW
























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands