Brother MFC-J1010DW, Online User'S Manual

Page: 100 / 535

Home > Scan > Scan Using the Scan Button on Your Machine > Save Scanned Data to a Folder as a PDF
File
Save Scanned Data to a Folder as a PDF File
Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother iPrint&Scan.
>> MFC-J1010DW/MFC-J1012DW
>> MFC-J1170DW
MFC-J1010DW/MFC-J1012DW
1. Load your document.
2. Press ( SCAN ).
3. Press
a
or
b
to select the
[to PC]
option, and then press OK .
4. Press
a
or
b
to select the
[to File]
option, and then press OK .
5. If the machine is connected over the network, press
a
or
b
to select the computer where you want to send
data, and then press OK .
If the LCD message prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the
computer, and then press
OK .
6. Do one of the following:
• To change the settings, go to the next step.
• To use the default settings, press Black Start or Color Start .
[Color Setting]
depends on the default settings. Pressing Black Start or Color Start does not allow
you to change the settings.
7. Press
a
or
b
to select the
[Scan Settings]
option, and then press OK .
To use the
[Scan Settings]
option, you must connect a computer with Brother iPrint&Scan installed to
the machine.
8. Press
a
or
b
to select the
[Set at Device]
option, and then press OK .
9. Select the scan settings you want to change, and then press OK .
Option Description
Color Setting
Select the scan color format of your document.
Resolution
Select the scan resolution for your document.
94