Brother MFC-J1010DW, Online User'S Manual

Page: 375 / 535

Error Message Cause Action
off will cause numerous cleaning cycles
since the machine automatically cleans
upon power up. The use of non-Brother
ink may cause frequent cleanings
because non-Brother ink could cause
poor print quality which is resolved by
cleaning. The more cleaning the machine
requires, the faster these boxes will fill up.
Repairs resulting from the use of non-
Brother supplies may not be covered
under the stated product warranty.
Ink Low The ink level is low. If the sending
machine has the ability to convert it, the
color fax will be printed at your machine
as a black & white fax. Prepare a new ink cartridge. You can
continue printing until the LCD displays
Replace Ink
.
See Related Information : Replace the Ink
Cartridges .
• You can still scan even if the ink is
low or needs to be replaced.
Jam Front
Repeat Jam Front The paper is jammed in the machine. Gently remove the jammed paper.
See
Related Information : Paper is
Jammed in the Front of the Machine (Jam
Front)
.
Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.
Jam Inside/Front
Repeat Jam The paper is jammed in the machine. Gently remove the jammed paper.
See
Related Information : Paper is
Jammed Inside and in the Front of the
Machine (Jam Inside/Front)
.
Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.
Jam Rear The paper is jammed in the machine. Gently remove the jammed paper.
See
Related Information : Paper is
Jammed in the Back of the Machine (Jam
Rear)
.
Make sure the paper guides are set to the
correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.
Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
See
Related Information : Clean the Paper
Pick-up Rollers .
Low Temperature The room temperature is too low. After warming the room, allow the
machine to warm up to room temperature.
Try again when the machine has warmed
up.
No Caller ID There is no incoming call history. You did
not receive calls or you have not
subscribed to the Caller ID service from
your telephone company. To use the Caller ID feature, call your
telephone company.
See
Related Information : Caller ID .
No Device When configuring the Wi-Fi Direct
network, the Brother machine cannot find
your mobile device. • Make sure your machine and mobile
device are in the Wi-Fi Direct mode.
369