Brother MFC-J1010DW Online User'S Manual Download Page 22

Page: 22 / 535

You can configure wireless settings by pressing the Wireless Status button.

[Shortcuts]

Create Shortcuts for frequently-used operations, such as sending a fax, copying, scanning, Web Connect and
Apps services.

•

Three Shortcuts tabs are available with six Shortcuts on each tab.

•

Press

, displayed at the bottom of the screen to access the Home Screens.

Information icon

New information from Brother appears in the information bar when the notification settings such as

[Message from Brother]

and

[Firmware Auto Check]

are set to

[On]

(An internet connection is needed, and data rates may apply.)

Press

to view the details.

Warning icon

The warning icon

appears when there is an error or maintenance message; press

to view the

details, and then press

to return to the Home screen.

Summary of Contents for MFC-J1010DW























































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J1010DW

Reviews:

Brands by name

Popular brands

Brother MFC-J1010DW, Online User'S Manual

Search results

Summary of Contents for MFC-J1010DW

Reviews:

Brands by name

Popular brands