manualshive.com logo in svg

Brother Innov-is 2800D, User Manual

Looking to unlock your creative potential with the Brother Innov-is 2800D? Our Design Manual is available for free download at manualshive.com, providing you with step-by-step instructions and tips to maximize your embroidery and sewing experience. Enhance your skills with this comprehensive manual designed to help you create stunning masterpieces effortlessly.

Share
Download
background image

ADJUSTING THE ALTERNATE BOBBIN CASE (WITH NO COLOR ON THE SCREW)

210

ADJUSTING THE ALTERNATE BOBBIN CASE 

(WITH NO COLOR ON THE SCREW)

When using the embroidery bobbin thread provided, please be sure to choose the green marked bobbin case when 
performing utility stitch sewing and embroidery functions. When in the embroidery function mode, the alternate 
bobbin case (with no color on the screw) should be selected when substitute embroidery bobbin threads (other than 
what is accompanied with your machine) are being used. The alternate bobbin case (with no color on the screw) 
can be easily adjusted when bobbin tension changes are required to accommodate different bobbin threads. See 
“Sewing Attractive Finishes” on page 141.

To adjust the bobbin tension for embroidery function, 
using the alternate bobbin case (with no color on the 
screw), turn the slotted screw (-) with a (small) 
screwdriver.

a

Do not turn a phillips screw (+).

b

Adjust with a screwdriver (small).

■

Correct Tension

Upper thread slightly appears on the wrong side of
fabric.

■

Bobbin Thread is Too Loose

Bobbin thread appears slightly on the right side of
fabric.

If this occurs, turn the slotted screw (-) clockwise, 
being careful not to over-tighten the screw, 
approximately 30-45 degrees to increase bobbin 
tension.

■

Bobbin Thread is Too Tight

Upper thread on the right side of fabric seems to be
lifting/looping and bobbin thread is not seen on the
wrong side of fabric.

If this occurs, turn the slotted screw (-) 
counterclockwise, being careful not to over-loosen 
the screw, approximately 30-45 degrees to decrease 
bobbin tension.

Right side of fabric

Wrong side of fabric

Right side of fabric

Wrong side of fabric

Right side of fabric

Wrong side of fabric

 CAUTION

• When adjusting the alternate bobbin case, be sure to 

remove the bobbin from the alternate bobbin case.

• DO NOT adjust the position of the phillips (+) 

screw on the alternate bobbin case as this may 
result in damage to the bobbin case, rendering it 
unusable.

• If the slotted screw (-) is difficult to turn, do not use 

force. Turning the screw too much or providing 
force in either (rotational) direction may cause 
damage to the bobbin case. Should damage occur, 
the bobbin case may not maintain proper tension.

Summary of Contents for Innov-is 2800D

































































































































































































































Reviews:

No comments

Related manuals for Innov-is 2800D

Sagem PHONEFAX 45DS User Manual preview
PHONEFAX 45DS
Brand: Sagem Pages: 48
Baby Lock Capella Instruction And Reference Manual preview
Capella
Brand: Baby Lock Pages: 120
Janome 6125QC Instruction Book preview
6125QC
Brand: Janome Pages: 43
Janome Memory Craft 550E Instruction Book preview
Memory Craft 550E
Brand: Janome Pages: 84
Necta Sfera 6-36 R/F Service Manual preview
Sfera 6-36 R/F
Brand: Necta Pages: 19
Janome JUNO E1030 Service Manual And Parts List preview
JUNO E1030
Brand: Janome Pages: 43
Olivetti Fax-Lab 610 Instructions Manual preview
Fax-Lab 610
Brand: Olivetti Pages: 76
Brother BE-1204B Instruction Manual preview
BE-1204B
Brand: Brother Pages: 262
Crane Linea User Manual preview
Linea
Brand: Crane Pages: 50
CYKLOP Axro-RLC Manual preview
Axro-RLC
Brand: CYKLOP Pages: 39
Advance acoustic Adfinity X20C Instructions For Use Manual preview
Adfinity X20C
Brand: Advance acoustic Pages: 116
Advance acoustic 01564A Instructions For Use And Parts List preview
01564A
Brand: Advance acoustic Pages: 52
Advance acoustic 9087161020 Instructions For Use Manual preview
9087161020
Brand: Advance acoustic Pages: 108
Life Fitness ARCTIC SILVER 90SW Parts Manual preview
ARCTIC SILVER 90SW
Brand: Life Fitness Pages: 15
Galaxy PH40V Instruction Manual preview
PH40V
Brand: Galaxy Pages: 28
Nilfisk-Advance 545 Instructions For Use Manual preview
545
Brand: Nilfisk-Advance Pages: 41
ZOJE ZJ-M3-S500-SF-LK2-V2 Manual preview
ZJ-M3-S500-SF-LK2-V2
Brand: ZOJE Pages: 190
Scotsman Prodigy C0630 Parts List preview
Prodigy C0630
Brand: Scotsman Pages: 13

Brands by name

Popular brands

Load more brands