Brother Innov-is 2800D, User Manual

Page: 74 / 224

SEWING THE STITCHES
72
f
Remove the basting, and then turn over the
fabric.
a
Wrong side of fabric
b
Surface of fabric
■
If the Needle Does Not Catch the Fold
Press in the width display so that the needle
slightly catches the fold.
■
If the Needle Catches Too Much of the Fold
Press in the width display so that the needle
slightly catches the fold.
Appliqués
a
Use a temporary spray adhesive or basting to
attach the appliqué to the fabric.
a
Appliqué
b Fabric glue
b
Press or .
c
Attach presser foot “J”, and then sew along
the edge of the appliqué, making sure that the
needle drops slightly off the edge.
a Appliqué
a
Needle drop point
Memo
Blind hem stitches cannot be sewn if the needle does
not catch the fold on the left side. However, if the
needle catches too much of the fold, the fabric cannot
be unfolded and too much of the seam will appear on
the surface of the fabric, leaving an unattractive finish.
If either of these occur, follow the instructions below to
correct the problem.
a
b
Memo
• Adjust the stitch width and length according to the
shape, size and fabric quality of the appliqué (see
page 44).
• For details on the stitch patterns, refer to the
“STITCH SETTING CHART” at the end of this
manual.
b
a
a
a