Brother Innov-is 2800D, User Manual

Page: 70 / 224

SEWING THE STITCHES
68
■
Quilting
Sewing together the quilt top, batting, and backing is
called quilting. You can sew the quilt with the
walking foot to keep the quilt top, batting, and
backing from sliding. The walking foot has a set of
feed dogs that move together with the feed dogs in
the needle plate during sewing.
a
Follow the steps on page 34 to remove the
presser foot.
b
Loosen the screw of the presser foot holder to
remove the presser foot holder.
c
Set the operation lever of the walking foot so
that the needle clamp screw is set between
the fork, and position the walking foot on the
presser foot bar.
a
Operation lever
b
Needle clamp screw
c Fork
d Presser foot bar
d
Lower the presser foot lever. Tighten the
screw securely with the screwdriver.
e
Place one hand on each side of the presser
foot to hold the fabric secure while sewing.
■
Appliqués
The seam will blend in if transparent nylon thread is
used for the upper thread.
a
Trace the pattern onto the appliqué fabric,
and then cut around it.
a
Seam allowance: 3 to 5 mm
b
Cut a piece of thick paper or stabilizer to the
finished size of the appliqué design, place it
on the back of the appliqué, and then fold
over the seam allowance using an iron.
c
Turn the appliqué over, and attach the
stabilizer with basting pins or a basting stitch.
d
Press , and then attach presser foot “J”.
b
d
a c
Memo
• Sew at slow to medium speed.
• Do not sew in reverse or use stitches that require
side ways or reverse feeding.
• Always check to be sure that your quilting surface is
securely basted before beginning to sew. Specialized
machine quilt needles and threads are also available
for machine quilting.
a