Brother Innov-is 2800D User Manual Download

Page: 53 / 224

SELECTING A UTILITY STITCH

tili
ty

tit

Selecting a Stitch Pattern

Turn on the machine, and then lightly press
the display.

→

Depending on the setting, either "1-01 Straight stitch
(Left)" or "1-03 Straight stitch (Middle)" is
automatically selected.

Press

to display a screen of

the stitches in the selected category, and then
select a stitch pattern.

* If a different screen is displayed, press

→

An image of the selected stitch pattern is displayed
below the symbol of the appropriate presser foot.

■

Using the Mirror Image Key

Press

so that it appears as

. A mirror

image of the selected stitch pattern is created.

■

Using the Image Key

You can display an image that is an approximate
size of the selected stitch. You can also check and
change the colors of the image on the screen.

Press .

→

An image of the selected stitch is displayed.

Press

to change the thread color of the

stitch on the screen.

Stitch screen

Memo

For details on the stitch patterns, refer to the “STITCH
SETTING CHART” at the end of this manual.

Note

appears as

after a stitch (buttonholes,

multi-directional sewing patterns, etc.) is selected, a
mirror image of the selected stitch cannot be created.

Memo

• The color changes every time you press

• The units of the stitch display area are in mm.

Summary of Contents for Innov-is 2800D

































































































































































































































Search results

Summary of Contents for Innov-is 2800D

Reviews:

Related manuals for Innov-is 2800D

Brands by name

Popular brands

Brother Innov-is 2800D, User Manual

Search results

Summary of Contents for Innov-is 2800D

Reviews:

Related manuals for Innov-is 2800D

Brands by name

Popular brands