background image

READ THIS BOOK

This operator’s book has important information for the use
and safe operation of this machine.  Read this book care-
fully before starting the machine.  Keep this book and tell
all  operators  to  read  the  book.    If  you  do  not  follow  the
instructions, you can cause an injury or damage equipment,
furniture or buildings.

For new books write to:
                  

Pacific

               2259 S. Sheridan
               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is no
concealed freight damage.  If such damage is discovered,
file a “CONCEALED DAMAGE REPORT” immediately
with the delivering carrier.

The contents of this manual are based on the latest product
information  available  at  the  time  of  publication.    Pacific
reserves the right to make changes or improvements to its
machines without notice.

FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:

MODEL

_______________________________

SERIAL NUMBER

______________________

PART NUMBER _________________________

DATE PURCHASED ______________________

                    OPERATING & MAINTENANCE

INTRODUCTION                                            INSTRUCTIONS

UHS BURNISHERS

MODELS

1500 DCP & 2000 DCP

Summary of Contents for 2000 DCP









Reviews: