Brother Innov-is 1500D, Operation Manual

Page: 93 / 201

SEWING STITCH PATTERNS
92
e
Press the “Start/Stop” button to stop the
machine, and then press the “Reverse/
Reinforcement Stitch” button to sew
reinforcement stitches.
Adjusting Patterns
Depending on the type and thickness of the fabric being
sewn, the sewing speed, whether or not stabilizer
material is used, etc., the desired result may not be
achieved. If this occurs, press , and then perform
the following adjustment using the same sewing
conditions as those used for your project. If the pattern
is still misaligned after making adjustments with
selected, adjust each pattern separately.
a
Press , and then press on P. 6 of
the screen.
b
Attach presser foot “N”, and then sew the
pattern.
c
Compare the sewn pattern with the following
illustration.
Memo
• When sewing character stitch patterns, the
machine automatically sews reinforcement
stitches at the end of the stitching, then stops
(The machine is automatically set to sew
reinforcement stitches at the beginning and
end of each character.)
• After sewing is finished, trim any excess thread.
Note
When sewing some patterns, the needle will stop in
the raised position while the fabric is fed due to the
operation of the needle bar separation mechanism
which is used in this machine. At such times, a clicking
sound different from the sound generated during
sewing will be heard. This sound is normal and is not
the sign of a malfunction.