Brother Innov-is 1500D Operation Manual Download Page 145

Page: 145 / 201

USING THE MEMORY FUNCTION

144

Press .

→

The sewing screen appears.

Retrieving Patterns from the
Computer

Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine (see page 142).

The “Removable Disk” icon appears in “My
Computer” on the computer.

Copy the pattern data to “Removable Disk”.

→

Pattern data in “Removable Disk” is written to the
machine.

Note

• While data is being written, do not disconnect the

USB cable.

• Do not create folders within “Removable Disk”.

Since folders are not displayed, pattern data within
folders cannot be retrieved.

• While the machine is sewing, do not write data to or

delete data from “Removable Disk”.

Summary of Contents for Innov-is 1500D










































































































































































































Search results

Summary of Contents for Innov-is 1500D

Reviews:

Brother Innov-is 1500D, Operation Manual, Page: 145 / 201

Search results

Summary of Contents for Innov-is 1500D

Reviews: