Brother Innov-is 1500D Operation Manual Download

Page: 190 / 201

UPGRADING YOUR MACHINE’S SOFTWARE

Append

189

UPGRADING YOUR MACHINE’S SOFTWARE

You can use a computer to download software upgrades for your sewing machine.

While holding the “Presser Foot Lifter” button
pressed, turn on the machine.

→

The following screen appears.

Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine.

→

The “Removable Disk” icon appears in “My
Computer” on the computer.

Copy the upgrade file to “Removable Disk”.

→

The message “Connected to PC. Do not disconnect
the USB cable.” appears.

When the screen shown in step

appears

again, press

→

The message “Saving the upgrade file. Do not turn
main power to OFF.”appears. The download takes
about 3 minutes.

When the following screen appears, the first
upgrade file is downloaded.

Copy the second upgrade file to “Removable
Disk”.

When the screen shown in step

appears

again, press

→

The message “Saving the upgrade file. Do not turn
main power to OFF.”appears. The download takes
about 3 minutes.

Note

There are two upgrade files. Be sure to download both files successively.

Memo

• When the machine’s software is upgraded, saved combinations of character and decorative stitches are erased.

However, saved embroidery patterns are not erased.

• While the software is being upgraded, the buzzer will not sound when a key is pressed.

Press LOAD after saving the

upgrade file in the

machine.

Press LOAD after saving the

upgrade file in the

machine.

Summary of Contents for Innov-is 1500D










































































































































































































Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands

Brother Innov-is 1500D, Operation Manual

Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands