Brother Innov-is 1500D Operation Manual Download

Page: 85 / 201

SEWING THE STITCHES

Press

, and then sew seam 4.

* The fabric will move sideways, so guide the fabric

with your hands to sew straight.

Zipper Insertion

■

Centered Zipper

Use for bags and other such applications.

Press .

* Be sure to select the straight stitch with the middle

needle position.

Attach presser foot “J”, sew straight stitches
up to the zipper opening, and then sew
basting stitches to the top of the fabric.

Wrong side of fabric

End of zipper opening

Basting

Reverse stitching

Press open the seam allowance, align the
seam with the center of the zipper, and then
baste the zipper in place.

Wrong side of fabric

Basting

Zipper teeth

Remove presser foot “J”, and then attach the
pin on the right side of zipper foot “I” to the
presser foot holder.

Right side

Left side

Needle drop point

Topstitch around the zipper, and then remove
the basting.

Memo

Zigzag stitches can also be used with multi-directional
sewing.

Memo

For details on the stitch patterns, refer to the “STITCH
SETTING CHART” at the end of this manual.

CAUTION

• When using zipper foot “I”, make sure the straight

stitch, middle needle position is selected. Turn the
handwheel to make sure the needle does not strike
the presser foot. If another stitch is selected, the
needle will strike the presser foot, causing the needle
to break and possibly causing injury.

CAUTION

• Make sure the needle does not strike the zipper

during sewing. If the needle strikes the zipper, the
needle may break, leading to injury.

Summary of Contents for Innov-is 1500D










































































































































































































Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands

Brother Innov-is 1500D, Operation Manual

Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands