Brother Innov-is 1500D Operation Manual Download

Page: 174 / 201

USING STORED CUSTOM STITCHES

MY
CU

ST
OM

ST
IT

173

Retrieving Custom Stitches from the
Machine’s Memory

Press

→

The pocket selection screen appears.

Select a custom stitch to be retrieved.

* Press

so that the custom stitch saved in that pocket

appears. If the entire saved custom stitch cannot be

displayed, press

to view the entire custom stitch.

* Press

to return to the previous screen without

saving the custom stitch.

Pockets holding saved custom stitches

Press .

* Press

to delete the custom stitch.

→

The selected custom stitch is retrieved and the
sewing screen appears.

Retrieving Custom Stitches from the
Computer

Using the included USB cable, connect the sewing
machine to your computer so that custom stitches can
be retrieved from your computer.
For details on retrieving custom stitches, see “Retrieving
Stitch Patterns from the Computer” on page 107.

Summary of Contents for Innov-is 1500D










































































































































































































Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands

Brother Innov-is 1500D, Operation Manual

Search results

Summary of Contents for Innov-is 1500D

Reviews:

Related manuals for Innov-is 1500D

Brands by name

Popular brands