Brother HL-2400Ce Series, User Manual, Page: 28 / 256

USER’S GUIDE
1-8
Operating and Storage Environment
Please note the following requirements before using the printer.
Power Supply
Use the printer within the specified power range.
AC power: ±10% of the rated power voltage
Frequency: 50/60 Hz (120V or 220-240 V)
The power cord, including extensions, should not exceed 5 metres (16.5
feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder, etc. If you must use the
printer with these appliances, we recommend that you use a voltage
transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Environment
Use the printer only within the following ranges of temperature and
humidity.
Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F)
Ambient humidity:
20% to 80% (without condensation)
Do not block the air exit on top of the printer. Do not place objects on top
of the printer, especially on the air exit.
Ensure that the printer Ozone Filter is installed at all times.
Ventilate the room where you use the printer.
Do not place the printer where it will be exposed to direct sunlight. Use
blinds to protect the printer from direct sunlight if set up near a window is
unavoidable.
Do not install the printer near devices that contain magnets or generate
magnetic fields.
Do not subject the printer to strong physical shocks or vibrations. Do not
expose the printer to open flames or salty or corrosive gasses.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not install the printer in a dusty place.
Do not install the printer near an air conditioner.