manualshive.com logo in svg

Brother HL-2400Ce Series, User Manual, Page: 153 / 256

Share
Download
Brother HL-2400Ce Series User Manual Download Page 153

USER’S GUIDE

5-6

 Oil 

Bottle

 Oil 

Bottle 

Low 

Message

When the Oil has almost  run out, the following message appears on the
LCD panel.  Prepare a new Oil Bottle to replace the nearly empty bottle.
After this message appears, you can print approximately 30 pages:

FUSER OIL LOW

 
 

Oil Bottle Empty Message

When the Oil completely runs out, the following message appears on the
LCD panel and the printer stops printing. When you see this message,
you must  replace the Oil Bottle with a new one:

23 OIL EMPTY

 Warning

The Fusing Unit and the parts around it are HOT! Be sure to wait
until the Fusing Unit has cooled sufficiently before replacing the Oil
Bottle.
If you touch the HOT parts, you might get injured.

!

Caution

Be careful not to spill oil inside the printer, it may cause considerable
damage and void your warranty. If you spill some oil, consult your dealer
or Brother authorized service representative.

 

Replacing the Oil Bottle

1. Press the 

Power

 button to turn off the printer and wait until it has

cooled down sufficiently.

2. Open the Top Cover.

Summary of Contents for HL-2400Ce Series

































































































































































































































































Reviews:

No comments