manualshive.com logo in svg

Brother HL-2400Ce Series, User Manual, Page: 2 / 256

Share
Download
Brother HL-2400Ce Series User Manual Download Page 2

II

Trademarks

Brother is a registered trademark of Brother Industries, Ltd.

Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple
Computer, Inc.
Centronics is a trademark of Genicom Corporation.
EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson
Corporation.
Hewlett-Packard, HP, PCL5C, PCL5e, PCL6 and PCL are registered trademarks, and HP
LaserJet 5, HP LaserJet 4+, HP LaserJet Plus, HP LaserJet II, HP LaserJet IID, HP
LaserJet IIID, HP-GL, HP-GL/2, and Bi-Tronics are trademarks of Hewlett-Packard
Company.
IBM, Proprinter XL, Proprinter, and IBM/PC are registered trademarks of International
Business Machines Corporation.
Intellifont is a registered trademark of AGFA Corporation, a division of Miles, Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States and
other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.

All trademarks noted herein are either the property of Brother Industries, Ltd.,

E

NERGY 

S

TAR is a U.S. registered mark.

All other brand and product names mentioned in this user’s guide are registered
trademarks or trademarks of respective companies.

Compilation and Publication

Under the supervision of Brother Industries Ltd., this manual has been compiled and
published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change
without notice.

Brother reserves the right to make changes without notice in the specifications and
materials contained herein and shall not be responsible for any damages (including
consequential) caused by reliance on the materials presented, including but not limited to
typographical and other errors relating to the publication.

©2000 Brother Industries Ltd.

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any
damage during transit. It is recommended that you save and use the original packaging. The
Printer should also be adequately insured with the carrier.

WARNING

When shipping the Printer, the TONER CARTRIDGES and ALL CONSUMABLES must
be removed from the Printer. Failure to remove the CONSUMABLES  during shipping
will cause severe damage to the Printer and will VOID THE WARRANTY (refer to
user’s manual).

Summary of Contents for HL-2400Ce Series

































































































































































































































































Reviews:

No comments