manualshive.com logo in svg

Brother HL-2400Ce Series, User Manual, Page: 191 / 256

Share
Download
Brother HL-2400Ce Series User Manual Download Page 191

USER’S GUIDE

5-44

 

2.

Unscrew the two screws securing the rear plate of the main

 

           controller board and pull out the main controller board.

 

 

 

 Fig. 5-53  Removing the Main Controller Board

 

 

3.

Unpack the DIMM and hold it by its edge.

 

 

!

Caution

 Do not touch the memory chips and the surface of the main controller
board. If static electricity collects, it may damage these electrical parts.

 

 

4.  Hold the DIMM with your fingers against the side edges and

 

     thumb against the back edge. Align the notches on the DIMM with

 

     the DIMM slot. (Check that the locks on each side of the DIMM

 

     slot are open, or outward.) .

 

 Fig. 5-54  Install the DIMM

 

 

5.    Press the DIMM straight into the slot (press firmly). Make sure

 

the locks on each side of the DIMM snap inwards into place. (To
remove a DIMM, the locks must be released.)

Summary of Contents for HL-2400Ce Series

































































































































































































































































Reviews:

No comments