CHAPTER 2 GETTING STARTED
2–7
Installing the Toner Cartridge
This printer uses a toner cartridge to print. You have one toner cartridge
as standard. A new cartridge contains enough toner to print up to
approximately 9,000 A4 or letter-size single-sided pages at about 5%
coverage (if the print density is set at level 8).
If you turn on the printer without the toner cartridge installed, the display
shows the following operator call message to prompt you to install the
toner cartridge.
14 NO CARTRIDGE
To install the toner cartridge, follow these steps:
1. Open the top cover of the printer.
2. Open the bag to unpack the toner cartridge.
!
Caution
•
Do not expose the toner cartridge to direct light.
•
Do not stand the toner cartridge on its end or turn it up-side down.
•
Do not touch the shaded parts shown below.
•
Do not open the drum shutter otherwise the toner or drum is adversely
affected and might cause serious damage when printing.
Fig. 2-10 Don’ts When Handling the Toner Cartridge
Drum Shutter
Summary of Contents for HL-2060
