CHAPTER 4 CONTROL PANEL
4–89
TEST Switch
You can test the printer or print out the list of fonts with the TEST switch.
To do so, hold down the SHIFT switch and press the TEST switch. You
will then enter the test mode where you may test the printer or print out
the list of fonts.
To test the printer, follow these steps:
1. Press the SEL switch to set the printer off-line.
2. Hold down the SHIFT switch and press the TEST switch.
When you enter the test mode, the display shows the first test mode
item.
DEMO PAGE
3. Press the
▲
or
▼
switch until the desired test mode appears on the
display.
Display Message
Test Mode
DEMO PAGE
Prints out the demonstration.
TEST PRINT
Performs the printer test and prints
out the test pattern.
PRINT CONFIG
Prints out the list of panel switch
settings you have configured for
the printer as user settings.
PRINT FONTS I
Prints out the list of internal or
resident fonts.
PRINT FONTS C
Prints out the list of optional fonts
stored in the font card.
PRINT FONTS P
Prints out the list of permanent
download fonts.
exit
Exits from the test mode. The
printer does not perform the test.
Summary of Contents for HL-2060
