Brother HL-2060 User Manual Download Page 189

Page: 189 / 286

CHAPTER 6 MAINTENANCE

6–7

Clean the printer interior as follows:

1. Turn off the printer and unplug the power cord.

2. Open the top cover of the printer and remove the toner cartridge.

3. Clean both sides of the paper access cover and transfer guide by

wiping off toner and paper particles with a dry, soft cloth. The paper
access cover can be lifted up to allow easier access for cleaning.

Fig. 6-6 Cleaning the Paper Access Cover

and Transfer Guide

4. Wipe off toner and paper particles from the top surface of the black

plastic paper guide with a dry, soft cloth.

Fig. 6-7 Cleaning the Paper Guide

5. Detach the cleaning brush from the top cover and clean the anti-static

teeth by brushing them several times. After cleaning, replace the
brush in its slot.

Refit the toner cartridge as described in REPLACING THE TONER
CARTRIDGE

7. Close the top cover of the printer and plug in the power cord.

Paper Access Cover

Transfer Guide

Paper Guide

Summary of Contents for HL-2060































































































































































































































































































Search results

Summary of Contents for HL-2060

Reviews:

Related manuals for HL-2060

Brands by name

Popular brands

Brother HL-2060, User Manual

Search results

Summary of Contents for HL-2060

Reviews:

Related manuals for HL-2060

Brands by name

Popular brands