Brother FAX-575 User Manual Download | Manualshive

Page: 5 / 114

background image

iii

Notice - Disclaimer of Warranties

(USA and Canada)

BROTHER’S LICENSOR(S), AND THEIR DIRECTORS,
OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY
BROTHER’S LICENSOR) MAKE NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE
SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT
WARRANT, GUARANTEE OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OR THE
RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF
ITS CORRECTNESS, ACCURACY, RELIABILITY,
CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO
THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS
ASSUMED BY YOU. THE EXCLUSION OF IMPLIED
WARRANTIES IS NOT PERMITTED BY SOME STATES IN
THE USA AND SOME PROVINCES IN CANADA. THE ABOVE
EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE
TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR
INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, AND THE LIKE) ARISING OUT
OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN
IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME
STATES IN THE USA AND SOME PROVINCES IN CANADA
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO
YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY
TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE
WHATSOEVER, AND REGARDLESS OF THE FORM OF THE
ACTION (WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE),
WILL BE LIMITED TO $50.

Compilation and Publication Notice

Under the supervision of Brother Industries Ltd., this User’s
Guide has been compiled and published, covering the latest
product descriptions and specifications.

The contents of this User’s Guide and the specifications of this
product are subject to change without notice.

Brother reserves the right to make changes without notice in the
specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.

«
...
3
4
5
6
7
...
»

Summary of Contents for FAX-575



















































































































Reviews:

No comments

Related manuals for FAX-575

Brand: Janome Pages: 47

1600P PROFESSIONAL -

Brand: Janome Pages: 29

MARCY PLATINUM MS-91

Brand: MPEX Pages: 11

Brand: Sagem Pages: 104

Brand: Singer Pages: 46

Brand: T-COM Pages: 6

Brand: MyBinding Pages: 3

Brand: Singer Pages: 25

Brand: Oki Pages: 91

AMS-210E Series

Brand: JUKI Pages: 243

Brand: JUKI Pages: 24

Brand: JUKI Pages: 124

Brand: Canon Pages: 2

Brand: JUKI Pages: 136

Brand: Philips Pages: 2

Brand: Philips Pages: 3

Gaggia RI8154/80

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands