Brother FAX-575 User Manual Download

Page: 84 / 114

9 - 2

Printing reports

Printing reports

Following reports are available:

How to print a report

Make sure that there is no document in the ADF.

Press

Copy/Reports

, then enter the number (see list above)

of the report you want to print. For example, press

to print

the

USER SETTINGS

Prints a Transmission Verification
Reports for the last fax that was sent.

This information will remain until you
pick up the handset.

Prints the Help List so you can see
at-a-glance how to quickly program your
fax machine.

Lists names and numbers stored in
One-Touch and Speed-Dial memory, in
numerical order.
Lists information about the last incoming
and outgoing faxes. (TX means
Transmit.) (RX means Receive.)

Quick-Dial list (above), alphabetically.

Lists your settings.

Lists summary information and amount
of occupied memory.

1.TRANSMISSION

2.HELP LIST

3.QUICK-DIAL

4.FAX JOURNAL

5.TEL.INDEX

6.USER SETTINGS

7.MEMORY STATUS

Summary of Contents for FAX-575



















































































































Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands

Brother FAX-575, User Manual

Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands