Brother FAX-575 User Manual Download

Page: 30 / 114

2 - 1

Paper

About paper

Handling and using plain paper

Store paper in its original packaging, and keep it sealed. Keep the
paper flat and away from moisture, direct sunlight and heat.

Paper specifications for the paper tray

Paper

Size:

letter, legal

Weight:

17 to 24 lb (64 to 90 g/m

)

Thickness:

0.003 to 0.0047 in. (0.08 to 0.12 mm)

Capacity:

up to 50 sheets (under the following conditions:
temperature 23°C, humidity 50%)

The fax machine can only scan an image 8.2 in. (208 mm)
wide, regardless of how wide the paper is.

Do not use cardboard, newspaper or fabric.

Do not use paper:

■

that is extremely shiny or highly textured

■

that was previously printed by a printer

■

that cannot be arranged uniformly when stacked

■

that is made with a short grain

■

that is curled, wrinkled, folded, ripped, stapled, paper-
clipped, pasted, or taped

Summary of Contents for FAX-575



















































































































Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands

Brother FAX-575, User Manual

Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands