Brother FAX-575 User Manual Download

Page: 72 / 114

7 - 3

Quick-Dial numbers and dialing options

Changing One-Touch and Speed-Dial numbers

If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name
stored there (or number) and will ask you to do one of the following:

Press

to change the stored

number.

—

Press

to exit without making

a change.

How to change the stored number or name:

■

If you want to change a character, use

to position

the cursor under the character you want to change, and
then type over it.

■

If you want to erase the whole number or whole name,
press

Stop/Exit

when the cursor is under the first digit or

letter. The characters above and to the right of the cursor
will be deleted.

Enter a new number.

Press

Menu/Set

Follow the directions beginning at Step 4 in Storing
One-Touch Number or Storing Speed-Dial numbers.

1234567

1.CHANGE 2.EXIT

▲

Summary of Contents for FAX-575



















































































































Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands

Brother FAX-575, User Manual

Search results

Summary of Contents for FAX-575

Reviews:

Related manuals for FAX-575

Brands by name

Popular brands