Brother FAX-575 User Manual Download | Manualshive

Page: 91 / 114

background image

Important information

11 - 5

16

Unplug this product from the AC power outlet and refer
servicing to Authorized Service Personnel under the following
conditions:

■

When the power cord is damaged or frayed.

■

If liquid has been spilled into the product.

■

If the product has been exposed to rain or water.

■

If the product does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions.
Improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.

■

If the product has been dropped or the cabinet has been
damaged.

■

If the product exhibits a distinct change in performance,
indicating a need for service.

17

To protect your product against power surges, we
recommend the use of a power protection device (Surge
Protector).

Trademarks

The Brother logo is a registered trademark of Brother Industries, Ltd.

Brother is a registered trademark of Brother Industries, Ltd.

© 2004 Brother Industries, Ltd. All rights reserved.

All other brand and product names mentioned in this manual
are registered trademarks of their respective companies.

Shipment of the fax machine

If for any reason you must ship your fax machine, carefully
package the fax machine to avoid any damage during transit. We
recommend that you save and use the original packaging. The fax
machine should also be adequately insured with the carrier.

«
...
89
90
91
92
93
...
»

Summary of Contents for FAX-575



















































































































Reviews:

No comments

Related manuals for FAX-575

Brand: Advance acoustic Pages: 64

Brand: Baby Lock Pages: 2

Brand: Janome Pages: 5

Brand: IGEBA Pages: 59

Brand: IGEBA Pages: 48

Brand: Radio Shack Pages: 36

Brand: Ricoh Pages: 116

Brand: Duerkopp Adler Pages: 24

Brand: Antari Pages: 12

Brand: Pfaff Pages: 150

Brand: Castelle Pages: 5

Brand: Bernina Pages: 39

STAC Vision 1.5

Brand: Zeck Audio Pages: 15

Brand: Baby Lock Pages: 200

Brand: Advance acoustic Pages: 12

Brand: Advance acoustic Pages: 38

Streamfeeder Tagger 125 Series

Brand: Thiele Pages: 37

Crescendo Quilting & Sewing Machine

Brand: Baby Lock Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands