Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
27
3
Configuring your machine for a wireless network
3
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
You must know your wireless network settings before you
proceed with this installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Use
Menu
,
a
or
b
to choose
Network
,
Factory Reset
, and choose
Yes
to accept the change. For Touchscreen models, press
MENU
,
Network
,
a
or
b
to display
Factory Reset
then press
Factory Reset
, and choose
Yes
to accept the
change. The machine will restart automatically.
Using the Setup Wizard from the control panel
3
You can configure your print server by using the
Setup Wizard
function. This is located in the
Network
menu on the machine’s control panel. See to the steps below for further information.
a
Write down the wireless network settings of your access point or wireless router.
b
Turn on the machine by plugging in the power cord.
c
Press
Menu
.
d
Press
a
or
b
to choose
Network
.
Press
OK
.
e
Press
a
or
b
to choose
WLAN
.
Press
OK
.
f
Press
a
or
b
to choose
Setup Wizard
.
Press
OK
.
Item
Example
Record the current wireless network settings
Communication mode: (Infrastructure)
Infrastructure
Network name: (SSID, ESSID)
HELLO
Authentication method:
(Open system, Shared key, WPA-PSK,
WPA2-PSK)
WPA2-PSK
Encryption mode:
(None, WEP,TKIP, AES)
AES
Network key:
(Encryption key
, WEP key, Passphrase)
12345678
