Brother DB2-DD7100, Service Manual

Page: 89 / 153

12. FUNCTION SETTING METHODS
SL-710A
82
12-2. Parameter setting flowchart
•
Turn off all LEDs.
For the B-100 operation panel, select
pattern 1.
•
Leave the machine stopped after thread
trimming.
•
Press the thread trimming and AUTO
keys. (The LED of the thread trimming
key will blink, and a parameter number
will appear on the AB displays.)
•
Set memory switch 01 to ON. *1
Start
•
Select the desired parameter number using
the and keys below the B display.
Change
other parameter setting
or finish setting?
•
Press the thread trimming key. (The
value corresponding to the currently set
parameter number will blink.)
•
Change the value using the and keys
below the AB displays. *3
Related to
b
acktacking?
•
Press the thread trimming keys. (The
plus or minus symbol currently selected
will blink.)
•
Select the plus or minus symbol using
the
key below the B display. *4
•
Press the thread trimming key.
(Parameter number will reappear.)
Changing
Completely?
•
Indicate parameter number
99 using the and keys
below the B display.
•
Indicate parameter number
90.
•
Press the thread trimming
key.
End
The data currently set for the parameter can
be checked only while the key below the A
display is kept pressed. *2
Finish
Change
No
Yes
No more changes
Further changes
*1: Refer to the memory switch setting flowchart.
*2: As to the data related to backtacking, press the
key to indicate the timing angle
(X15
°
) and key to indicate a plus or minus symbol.
*3: As to backtacking information, the timing angle (X15
°
) will appear.
*4: Select a plus < > or minus symbol < > for the value determined in *3.