Brother DB2-DD7100, Service Manual

Page: 11 / 153

3. NOTES ON HANDLING
SL-710A
4
3. NOTES ON HANDLING
About the machine set-up location
• Do not set up this sewing machine near other equipment such
as televisions, radios or cordless telephones, otherwise such
equipment may be affected by electronic interference from the
sewing machine.
• The sewing machine should be plugged directly into an AC
wall outlet. Operation problems may result if extension cords
are used.
Carrying the machine
• The machine should be carried by the arm by two people as
shown in the illustration.
* Do not hold the machine by the machine pulley.
Tilting back the machine head
• While pulling the bottom rear of the bed toward you with your
left hand, push the top right of the arm body with your rigth
hand to tilt back the machine head.
* Be careful not to get your left hand caught between the
bottom of the bed and the table.
Returning the machine head to the upright position
1. Clear away any tools, etc. which may be near the table holes.
2. While holding the face plate with your left hand, gently return
the machine head to the upright position with your right hand.
0777M
0776M
0775M
0774M