Brother BES Lettering Instruction Manual Download Page 103

Page: 103 / 146

Editing Designs

101

On the Arrange tab of the Ribbon, select the appropriate

button from the following:

Moving Parts of a Design Manually

You can move the component parts of your design relative to

each other by dragging them to another location.

To move a design component manually:

From the Home tab, click the Select

tool.

Click and drag the design component to its new location.

As you drag, the status line displays the horizontal (dx) and
vertical (dy) distance.

Align Left:

Aligns all selected objects to the left-most item

selected.

Align Right:

Aligns all selected objects to the right-most item

selected.

Align Top:

Aligns all selected objects to the top-most item

selected.

Align Bottom:

Aligns all selected objects to the bottom-most

item selected.

Vertical Center:

Takes all selected objects and centers them

in the selection box. The objects are moved so that they are
centered top-to-bottom with each other, but they are not
moved left or right.

Horizontal Center:

Takes all selected objects and centers

them in the selection box. The objects are moved so that they
are centered left-to-right with each other, but they are not
moved up or down.

Center:

Centers the selected objects in the current hoop.

If more than one object is selected, the entire group is moved
together to the center of the hoop; the objects selected
remain in the same position relative to each other as they
had before being centered.

Summary of Contents for BES Lettering



















































































































































Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands

Brother BES Lettering, Instruction Manual

Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands