Brother BES Lettering Instruction Manual Download Page 20

Page: 20 / 146

Pacesetter BES Lettering
Instruction Manual

The View Tab

The controls on the View tab allow you to change what appears

on your workspace; which panels are displayed, whether or not

commands and stitch points are shown in the design, and so on.

The areas found on this tab are Windows, Show/Hide, and

Program Preferences.

Windows

In the windows area, check the box to show the corresponding

window or panel, and uncheck it to hide that window or panel.

•

Sequence. Shows/hides the Sequence view.

•

Palette. Shows/hides the thread palette.

•

Properties. Shows/hides the properties panel.

•

Simulator. Shows/hides the sewing simulator.

•

Status. Shows/hides the status bar.

Show/Hide

Check the boxes to show the corresponding symbols in the

Design Workspace.

•

Entry/Exit. Shows the position of the first and last points

in the sewing of a segment.

•

Commands. Displays icons in the workspace that show

where the color changes and trims are.

•

Stitch points. Shows the penetration points of the

stitches.

Program Preferences

Click on the Program Preferences

button to open a dialog

in which you can set the default machine settings, change the

units of measure, and choose settings for the workspace grid.

For more information on this dialog, see “Setting up your

Workspace Environment”

Summary of Contents for BES Lettering



















































































































































Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands

Brother BES Lettering, Instruction Manual

Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands