Brother BES Lettering Instruction Manual Download Page 123

Page: 123 / 146

Editing Designs

121

To move a segment forward:

Select the segment or segments.

Do one of the following:



In the design workspace, right-click the segment(s) and

choose Move—Up.



In the Sequence View area, right-click the segment(s) in
the list and choose Move—Up.

The segment is moved one position forward in the sewing
order. This change is reflected in its position in sequence
view.

To move a segment backward:

Select the segment(s).

Do one of the following:



In the design workspace, right-click the segment(s) and
choose Move—Down.



In the Sequence View area, right-click the segment(s) in

the list and choose Move—Down.

The segment is moved one position backward in the sewing
order. This change is reflected in its position in sequence
view.

Summary of Contents for BES Lettering



















































































































































Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands

Brother BES Lettering, Instruction Manual

Search results

Summary of Contents for BES Lettering

Reviews:

Related manuals for BES Lettering

Brands by name

Popular brands