Brother BE-438HS, Service Manual

Page: 63 / 223

5. SETTING FUNCTION
KE-430HX/KE-430HS, BE-438HX/BE-438HS 52
5-4. Slow start pattern setting method
The starting-up speed at the sewing start can be adjusted by setting a slow start pattern.
* When memory switch No. 100 is OFF, slow start cannot be set.
* The smaller the number, the slower the start.
* This is used to stop the thread from pulling out at the sewing start, and at times when skipped stitches might easily occur.
1 Switch to the slow start setting screen. Touch the menu key to switch to the setting menu screen.
Touch "Slow start setting" in the menu to switch to the
slow start setting screen.
2
You can touch the or key (1) to change
the slow start pattern (2).
(Initial value: 430HX/HS: 8, 438HX/HS: 7)
When the setting is complete, touch the OK key
on the screen.
・
Touch the OK key to switch to the setting menu
screen, and the slow start setting value which is set
will be applied from the next time sewing is carried
out.
Slow start
pattern
1. Slow start is set as shown in the following table.
2. You can change the starting-up speed by changing the slow start pattern.
430HX/HS: Medium-weight materials (-03), knitted wear (-0K), light-weight materials (-01)
1 2 3 4 5 6 7 8 9
Sewing speed for the 1st stitch 200 200 300 400 400 400 400 800 1,500
Sewing speed for the 2nd stitch 200 300 400 400 500 600 800 1,200 3,000
Sewing speed for the 3rd stitch
300 400 500 600 800 800 1,200 2,500 3,300
Sewing speed for the 4th stitch 500 600 700 900 1,200 1,200 2,500 3,300 3,300
430HX/HS: Heavy-weight materials (-05)
1 2 3 4 5 6 7 8 9
Sewing speed for the 1st stitch 200 200 300 400 400 400 800 1,500 1,500
Sewing speed for the 2nd stitch 200 300 400 400 600 800 1,200 2,000 3,000
Sewing speed for the 3rd stitch 300 400 500 600 800 1,200 2,500 2,500 3,300
Sewing speed for the 4th stitch 500 600 700 900 1,200 2,500 3,300 3,300 3,300
438HX/HS
1 2 3 4 5 6 7 8 9
Sewing speed for the 1st stitch 200 200 300 300 300 400 400 400 400
Sewing speed for the 2nd stitch 200 200 300 300 400 400 400 600 900
Sewing speed for the 3rd stitch 300 300 300 400 400 400 600 900 1,500
Sewing speed for the 4th stitch 300 400 400 400 400 400 900 2,000 2,000
* The speed will not be faster than the sewing speed which has been set.
* The thread nipper device will not operate for settings other than 8 and 9.
(sti/min)
Initial value
(1)
(2)
(sti/min)
(sti/min)