Brother BAS-761 Instruction Manual Download Page 27

Page: 27 / 155

Programmer

Chapter 2 Programming with Help Function

Curve

The pattern with curves is programmed.
The example in the left is used for explanation of
programming at the curve and the corner.

Be sure to press

twice for a split at corner point E. If a split is not made, the corner will be round.

When a split is made

When a split is not made

More intermediate points such as points B, C, D, F, G or H will create smooth curves.

Programming

Press

The work clamp comes down and the programmer screen is
displayed.

Select

with

, then press

Move the needle with

. Press

when the needle point is at point A of the

pattern.

The first stitch (point A) is programmed.

Select

with

, then press

Summary of Contents for BAS-761




























































































































































Search results

Summary of Contents for BAS-761

Reviews:

Related manuals for BAS-761

Brands by name

Popular brands

Brother BAS-761, Instruction Manual

Search results

Summary of Contents for BAS-761

Reviews:

Related manuals for BAS-761

Brands by name

Popular brands