Brother ADS-2600W, Quick Setup Manual, Page: 20 / 36

20
For Wireless Network Users
e
Choose Yes, I have a USB cable to use for
installation. and then click Next .
f
Temporarily connect the USB cable directly to
the computer and the machine.
If the confirmation screen appears, check the
box and click
Next , go to
g
.
Otherwise, go to
h
.
g
When the following screen appears, check Yes
if you want to connect to the listed SSID. Click
Next and go to
j
.
h
When the following screen appears, the wizard
will search for wireless networks available to
your machine. Choose the SSID that you wrote
down for your network in step
9-a
on page 17,
and then click Next .
Note
If this screen appears, read the Important
Notice . Check the box after you confirm the SSID
and Network Key, and then click Next .
Note
For instructions on connecting the USB cable to
the USB port of your machine, see
Connect the
USB cable on page 7.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then click
Refresh .
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID) , and
then click Next .