13
Macintosh
Wired Network
Window
s
®
Macintosh
Wired Network
For wired network interface users
(Mac OS X v10.6.x, 10.7.x)
8
Before you install
Make sure your machine is connected to the power
and your Macintosh is on. You must be logged on with
Administrator rights.
9
Connect the network
cable
a
You will find the Ethernet port marked with a
symbol on the back of the machine as
shown below. Remove the protective cap and
connect the network cable to the Ethernet port.
b
Connect the cable to your network.
Note
• For Mac OS X v10.5.x users, upgrade to
Mac OS X v10.6.x - 10.7.x before installation.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, you should check that the
machine’s
Wired Enable
is set to
On
. The
wireless network interface will become inactive
with this setting.
On your machine, press
and
Network
.
Swipe up or down, or press
a
or
b
to display
Wired LAN
, and then press
Wired LAN
.
Swipe up or down, or press
a
or
b
to display
Wired Enable
, and then press
Wired Enable
.
Press
On
.
Press .
USB
