Collet (3/16”, 1/2”,
3/8" and 1/4")
Ensure proper functioning. Test with rod to ensure proper fit. Inspect for
cracks, bends, other damage. Replace as necessary.
Collet Washer
Inspect for cuts, excessive wear, or any other damage. Replace as
required. Ensure correct size washer is being used to fit collet.
Flash Arrestor
Unscrew the flash arrestor from the torch body. Check for damage,
wear, and/or clogging. Clean and/or replace as needed.
Flash Arrestor Screen
Remove from inside the flash arrestor by sliding it out the back. Inspect
for damage, wear, corrosion, and/or clogging. If dirty, clean with warm
soapy water, rinse with clean fresh water, and air dry. If damaged or
corroded, replace with a new screen.
Oxygen Control Valve
and Lever
Inspect the lever and valve stem for wear, damage, and leaks. Inspect
the mating surface of the valve nut and valve body recess for damage
or wear. Replace valve stem o-ring or neoprene seat if leaking or worn.
Use caution when replacing valve nut so as not to damage threads. Do
not over torque. Damage to valve nut o-ring may result.
Plug Valve
Check for proper functioning. Inspect for any type of damage. Replace
o-rings or plug insert as necessary.
Male Quick Connect
Inspect for dents, bends, or other damage. Check for correct seating
and locking with the oxygen hose assemblies.
Cable, Power w/ Connector:
Wipe all surfaces with an oil-flee cloth. An oil-free brush can be used on
metal surfaces.
CAMLOK, Black
Check for broken insulator, nicks, dents, bends, excessive wear, or
other damage. Ensure proper seating and locking with the receptacles
on the torch, battery and battery adapter clamp.
Striker Plate Assembly:
Wipe all surfaces with an oil-free cloth. An oil-free brush can be used on
metal surfaces/fittings. Replace damaged/unserviceable items as
necessary.
Striker Plate Handle
Check for burns, cracks, wear, or other damage.
Copper Plate
Inspect for signs of damage. Remove any slag build-up.
Wooden Insulator
Check for cracks, breaks, or other damage.
Wire Terminal Lug
Ensure proper connection. Inspect for any damage.
Cable
Check for burns, abrasions, excess wear, or other damage.
CAMLOK, Red
Check for broken insulator, nicks, dents, bends, excessive wear, or
other damage. Ensure proper seating and locking with the receptacles
on the battery and battery adapter clamp.
Lightweight Battery:
Clean with oil-free cloth and brushes. Inspect for cracks in the case,
burns in the pouch and other damage. Ensure all connectors function
properly. Check the charge, recharge as needed.
Battery Charger
Inspect for wear / damage.
Back Harness Assembly:
Clean with oil-free cloth/rags and oil-free brushes. If extremely dirty,
clean with warm soapy water, rinse with clean fresh water, and air dry.
Confirm the serviceability of the straps, buckles, and fasteners.
