f.
Backpack Assembly.
(PC/ARC-BP-BK) The back harness assembly features a comfortable
backpack Molle platform with cylinder support enclosures, battery bag, rod extender and cutting rod
holders, pouches for mask, hoses, cable, and keeper clips.
The oxygen cylinder bag has internal compartments on the sides and back to hold (user provided)
ballistic protection material.
PC/ARC-BP-BK BACKPACK SET
OXYGEN CYLINDER ENCLOSURE; GEAR POUCH &
BATTERY BAG; CUTTING ROD & EXTENDER HOLDERS
g.
Quivers.
Components of the backpack assembly, the quivers are for holding the cutting rods and
the rod extender. Cutting rod holder is adjustable to accommodate either 18 inch or 36 inch rods.
Molle straps make for easy attachment to the backpack assembly or other vests or load bearing
gear
h.
Extender.
The cutting rod extender (PC/TACXT16) included in the torch set extends the reach of
the rod 16 inches and is used to enable the operator to gain reach or standoff, employ the torch in
otherwise inaccessible places and or make best use of available cover. A 36” long extender is
available from Broco as an optional accessory.
PC/TACXT16 CUTTING ROD EXTENDER
i.
Safety Equipment.
The safety equipment included with each kit consists of welder's gloves and
one pair of safety goggles with number 5 shade lense.
PC/TSG PROTECTIVE GOGGLES, SHADE 5
PC/WG WELDER’S GLOVES
Never operate this equipment without proper face and eye protection. Always use a number 5 or 6
shade filter lens.
