Brocade Communications Systems ICX 6650 series Hardware Installation Manual Download Page 30

Page: 30 / 83

4. Attach the front right bracket to the rail rack using two 10-32 x 5/8 in. screws and the appropriate round-hole or square-hole

retainer nuts. Refer to the following figure.

FIGURE 14

Installing the Brocade ICX 6650 in a 2-post rack

5. Repeat step 3 to attach the left front bracket to the left front rack rail and tighten all 10-32 x 5/8 in. screws to a torque of 25 in-

lb (29 cm-kg).
Proceed to

Attaching a PC or terminal

on page 33.

4-post rack mount installation

Kits for 4-post rack mounting are not included in the shipping carton and must be ordered separately.

NOTE

Use the following procedure when installing the Brocade ICX 6650 in a 4-post rack cabinet. For 2-post cabinets, follow the
procedures in

2-post rack mount installation

on page 28.

Installing the device in a rack or cabinet

Brocade ICX 6650 Hardware Installation Guide

Part Number: 53-1003621-04

Summary of Contents for ICX 6650 series




















































































Search results

Summary of Contents for ICX 6650 series

Reviews:

Related manuals for ICX 6650 series

Brands by name

Popular brands

Brocade Communications Systems ICX 6650 series, Hardware Installation Manual

Search results

Summary of Contents for ICX 6650 series

Reviews:

Related manuals for ICX 6650 series

Brands by name

Popular brands