Brocade Communications Systems ICX 6650 series Hardware Installation Manual Download Page 61

Page: 61 / 83

3. Unlock the copper or fiber-optic module by pulling the bail latch forward, away from the front panel of the module, as shown in

the following figure.

NOTE

On 1000Base-SX ports, the bail latch is enclosed in a black sleeve, and on 1000Base-LX ports, the bail latch is
enclosed in a blue sleeve.

FIGURE 26

Unlocking the bail latch

Bail Latch

NOTE

The bail latch may be attached to either the top or the bottom of the SFP+ or QSFP+ transceiver.

4. Grasp the bail latch and pull the copper or fiber-optic module out of the port, as shown in the following figure.

FIGURE 27

Removing the fiber-optic module

5. Store the copper or fiber-optic module in a safe, static-free place or in an anti-static bag.
6. Install a new copper or fiber-optic module in the port.

Replacing a copper or fiber-optic module

Brocade ICX 6650 Hardware Installation Guide

Part Number: 53-1003621-04

Summary of Contents for ICX 6650 series




















































































Search results

Summary of Contents for ICX 6650 series

Reviews:

Related manuals for ICX 6650 series

Brands by name

Popular brands

Brocade Communications Systems ICX 6650 series, Hardware Installation Manual

Search results

Summary of Contents for ICX 6650 series

Reviews:

Related manuals for ICX 6650 series

Brands by name

Popular brands