Brocade Communications Systems 6542 Hardware Reference Manual Download Page 9

Page: 9 / 60

Brocade 6542 Blade Server SAN I/O Module for Inspur Shangri-la Chassis Hardware Reference Manual
53-1003885-01

About This Document

●

Supported hardware and software ...................................................... 9

Supported hardware and software

This document is applicable for the following blade server SAN I/O switch module.

TABLE 1

Supported device

Blade Server SAN I/O module

Required Fabric OS version

Supported Inspur chassis

Brocade 6542 Gen-5 16-Gbps FC
Switch Module

Brocade Fabric OS 7.4.0_ins or later Inspur Shangri-la Blade Server

chassis

The following table lists the models of this switch module supported and available for use with the
Inspur Shangri-la Blade Server chassis.

TABLE 2

Supported device models

Model

Number of FC

ports

SFPs included

Licenses included

Entry (Base)

2 16-Gbps SFP+

Mid-range (Base + POD1)

2 16-Gbps SFP+

POD1 + FF

Enterprise (Base + ENT)

2 16-Gbps SFP+

FF + TRK + FV + EXF

The following table lists the Brocade-branded SFP+ optical transceivers and cables that are supported
on the switch module.

TABLE 3

Supported transceivers and cables

SFP+ Transceiver P/N

Media cable P/N

Transceiver/Cable Type

XBR-000192 (1-pack)

XBR-000193 (8-pack)

57- 0000088-01

16-Gbps FC SWL

XBR-000198 (1-pack)

XBR-000199 (8-pack)

57- 0000089-01

16-Gbps FC LWL 10 Km

XBR-000258 (1-pack)

57- 1000262-01

16-Gbps FC ELWL 25 Km

NOTE

For the latest list of supported device models, transceivers, and cables, contact Inspur or your
solution provider.

Summary of Contents for 6542





























































Search results

Summary of Contents for 6542

Reviews:

Brands by name

Popular brands

Brocade Communications Systems 6542, Hardware Reference Manual

Search results

Summary of Contents for 6542

Reviews:

Brands by name

Popular brands