Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 65
Broadcom Confidential and Proprietary
Syntax:
pxeprg <filename>
10.21 flshdev
cmd:
flshdev
Description:
Select flash device to access
Syntax:
flshdev seeprom | atmelflash | sstflash
10.22 bitbang
cmd:
bitbang
Description:
Generate bitbang pattern to seeprom bus. Enter hex numbers to be written to
seeprom bus. For serial eeprom, use 's' for start, 'p' for stop condition, 'x' with '1..9' specifies
how many residual bits to send. For flash, use 's' for chipSelect, 'p' for cancel chipSelect 'r'
with a number specifies how many bytes to read.
Syntax:
bitbang <data>
10.23 seclock
cmd:
seclock
Description:
set NVRAM config1 content value after reset.
Syntax:
seclock <32bitNewValue>
10.24 setorture
cmd:
setorture
Description:
NVRAM reset torture test
Syntax:
setorture
Options:
-c
Continue on Error
-i<DEC>
Initial Delay in ms (def=0)
-m<DEC>
Maximum Delay in ms (def=3000)
-n<DEC>
iteration (def=1)
-p
Power reset
